Publications
J. Yang, M. B. Dizon, F. B. Cheung, J. L. Rempe, K. Y. Suh and S. B. Kim, "Critical Heat Flux for Downward Facing Boiling on a Coated Hemispherical Surface," Experimental Heat Transfer, Vol. 18, 2005.
Y. H. Kim, S. J. Kim, J. J. Kim, S. W. Noh, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Visualization of Boiling Phenomena in Inclined Rectangular Gap," International Journal of Multiphase Flow, Vol. 31, Issue 5, pp. 618-642, 2005.
F. B. Cheung, "Limiting Factors for External Reactor Vessel Cooling," Invited keynote Paper, Nuclear Technology for NURETH10 Special Edition, Vol. 152, No. 2, pp. 145-161, 2005.
J. L. Rempe, D. L. Knudson, K. G. Condie, F. B. Cheung, K. Y. Suh, and S. B. Kim "Development of an Enhanced In-Vessel Core Catcher for Improving In-Vessel Retention Margins," Invited paper, Nuclear Technology for NURETH10 Special Edition, Vol. 152, No. 2, pp.170-182, 2005.
C. S. Kim, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Effect of Interfacial Wavy Motion on Film Boiling Heat Transfer from Isothermal Downward-facing Hemispheres," Nuclear Engineering and Design, Vol. 235, pp. 2141-2154, 2005.
J. Yang, F. B. Cheung, J. L. Rempe, K. Y. Suh and S. B. Kim, "Critical Heat Flux for Downward-Facing Boiling on a Coated Hemispherical Vessel Surrounded by an Insulation Structure” Proceedings 2005 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper No. 5321, Seoul, Korea, May 2005.
J. L. Rempe, D. L. Knudson, , K. G. Condie, F. B. Cheung, K. Y. Suh and S. B. Kim, "Increased Margin Associated with Options to Enhance In-Vessel Retention,” Proceedings 2005 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper No. 5403, Seoul, Korea, May 2005.
S. D. Lee, K. H. Lee, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Natural Convection Heat Transfer Experiment in a Hemispherical Pool,” Proceedings 2005 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper No. 5577, Seoul, Korea, May 2005.
K. H. Kang, R. J. Park, S. B. Kim, K. Y. Suh, F. B. Cheung, and J. L. Rempe, "Simulant Melt Experiments for the Investigations of In-Vessel Core Catcher Performance during Severe Accidents,” Proceedings 2005 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper No. 5606, Seoul, Korea, May 2005.
J. J. Kim, Y. H. Kim, S, J, Kim, S, W, Noh, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Critical Heat Flux in Inclined Rectangular Narrow and Long Channel,” Proceedings 2005 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper No. 5579, Seoul, Korea, May 2005.
J. Yang, F. B. Cheung, J. L. Rempe, K. Y. Suh and S. B. Kim, "Correlations of Nucleate Boiling Heat Transfer and Critical Heat Flux for External Reactor Vessel Cooling” ASME Summer Heat Transfer Conference, Paper No. HT2005-72334, San Francisco, CA, July 2005.
C. H. Kim, M. J, Yu, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Film Boiling on Downward Facing Flat Plates with Varying Inclination Angles,” ASME Summer Heat Transfer Conference, Paper No. HT2005-72503, San Francisco, CA, July 2005.
S. D. Lee, H. M. Son, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Prandtl Number Dependent Natural Convection in a Rectangular Pool with Internal Heat Sources,” ASME Summer Heat Transfer Conference, Paper No. HT2005-72505, San Francisco, CA, July 2005.
J. L. Rempe, K. Y. Suh, F. B. Cheung, and S. B. Kim "Insights from Investigations of In-Vessel Retention for High Powered Reactors," Proceedings of the 11 th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-11), Paper No. 142, Avignon, France, October 2005.
K. H. Kang, R. J. Park, S. B. Kim, K. Y. Suh, F. B. Cheung, and J. L. Rempe, "Simulant Melt Experiments on the Performance of In-Vessel Core Catcher,” Proceedings of the 11 th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-11), Paper No. 271, Avignon, France, October 2005.
M. B. Dizon, J. Yang, F. B. Cheung, J. L. Rempe, K. H. Suh and S. B. Kim, "Effects of Surface Coating on the Critical Heat Flux for Pool Boiling from a Downward Facing Surface," Journal of Enhanced Heat Transfer, Vol. 11, pp. 133-150, 2004.
J. L. Rempe, D. L. Knudson, K. G. Condie, K. Y. Suh, F. B. Cheung, and S. B. Kim "Corium Retention for Higher Power Reactors by an In-Vessel Core Catcher in Combination with External Reactor Vessel Cooling," Nuclear Engineering and Design, Vol. 230, pp.293-309, 2004.
D. L. Knudson, J. L. Rempe, K. G. Condie K. Y. Suh, F. B. Cheung, and S. B. Kim, "Late-Phase Melt Conditions Affecting the Potential for In-Vessel Retention in High Power Reactors," Nuclear Engineering and Design, Vol. 230, pp.133-150, 2004.
J. L. Rempe, D. L. Knudson, K. G. Condie, K. Y. Suh, F. B. Cheung, and S. B. Kim "Conceptual Design of an In-Vessel Core Catcher," Nuclear Engineering and Design, Vol. 230, pp.311-335, 2004.
J. Yang, M. B. Dizon, F. B. Cheung, J. L. Rempe, K. H. Suh and S. B. Kim, "CHF Enhancement by Vessel Coating for External Reactor Vessel Cooling," Proceedings 2004 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper #4041, June 2004.
K. H. Lee, S. D. Lee, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Prandtl Number Dependent Natural Convection with Internal Heat Sources," Proceedings 2004 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper #4066, June 2004.
J. J. Kim, Y. H. Kim, S. J. Kim, S. W. Noh, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Critical Heat Flux in Inclined Rectangular Narrow Gaps," Proceedings 2004 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper #4067, June 2004.
J. L. Rempe, D. L. Knudson, K. G. Condie, K. Y. Suh, F. B. Cheung, and S. B. Kim "Design and Evaluation of an Enhanced In-Vessel Core Catcher," Proceedings 2004 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper #4122, June 2004.
K. H. Kang, R. J. Park, W. S. Ryu, S. B, Kim, K. Y. Suh, F. B. Cheung and J. L. Rempe, "Thermal and Metallurgical Response of the In-Vessel Core Catcher According to the Gap Size with the Lower Head Vessel," Proceedings 2004 International Congress on Advanced Nuclear Power Plants (ICAPP), Paper #4246, June 2004.
J. Yang, M. B. Dizon, F. B. Cheung, J. L. Rempe, K. H. Suh and S. B. Kim, "Critical Heat Flux for Downward Facing Boiling on a Coated Hemispherical Surface," Proceedings ASME Summer Heat Transfer Conference, Paper #HT-FED 2004-56056, July 2004.
J. Yang and F. B. Cheung, "A Hydrodynamic CHF Model for Downward Facing Boiling on a Coated Vessel," Proceedings of the Sixth International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety ( NUTHOS-6), Paper ID N6P025, Japan, 2004.
J. Yang, M. B. Dizon, F. B. Cheung, J. L. Rempe, K. H. Suh and S. B. Kim, "Downward Facing Boiling and Steam Venting Under Simulated ERVC Conditions," Proceedings of the Sixth International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety ( NUTHOS-6), Paper ID N6P149, Japan, 2004.
J. L. Rempe, F. B. Cheung, K. Y. Suh, and S. B. Kim, " In-Vessel Retention – Recent Efforts and Future Needs," Proceedings of the Sixth International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety ( NUTHOS-6), Paper ID N6P045, Japan, 2004.
K. H. Kang, R. J. Park, S. B, Kim, K. Y. Suh, F. B. Cheung and J. L. Rempe, "Thermal and Metallurgical Performance of the Multi-Layered In-Vessel Core Catcher During Severe Accidents," Proceedings of the Sixth International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety ( NUTHOS-6), Paper ID N6P232, Japan, 2004.
C. S. Kim, K. Y. Suh, F. B. Cheung, J. L. Rempe, and S. B. Kim, "Filming Boiling on Downward Quenching Hemisphere of Varying Sizes," Proceedings 12 th International Conference on Nuclear Engineering, Paper #ICONE-12-49305, Arlington, VA, April 25-29, 2004.
K. H. Kang, R. J. Park, S. B, Kim, K. Y. Suh, F. B. Cheung and J. L. Rempe, "Experiments on Performance of the Multi-Layered In-Vessel Core Catcher," Proceedings 12 th International Conference on Nuclear Engineering, Paper #ICONE-12-49193, Arlington, VA, April 25-29, 2004.
J. L. Rempe, D. L. Knudson, K. G. Condie, D. Swank, F. B. Cheung, K. Y. Suh, and S. B. Kim "Materials Interaction Tests to Identify Base and Coating Materials for an Enhanced In-Vessel Core Catcher Design," Proceedings 12 th International Conference on Nuclear Engineering, Paper #ICONE-12-49579, Arlington, VA, April 25-29, 2004.
Y. H. Kim, S. J. Kim, J. J. Kim, S. W. Noh, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Critical Heat Flux Phenomena in One-Dimensional Narrow Gap," Proceedings of 3 rd International Symposium on Two-Phase Flow Modeling and Experimentation, Pisa, Italy, September 2004.
J. J. Kim, Y. H. Kim, S. J. Kim, S. W. Noh, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Boiling Visualization and Critical Heat Flux Phenomena in Narrow Rectangular Gap," Proceedings of 4 th Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS4), Sapporo, Japan, December 2004.
C. S. Kim, K. Y. Suh, J. L. Rempe, F. B. Cheung, and S. B. Kim, "Filming Boiling Heat Transfer Modeling for Relatively Large-Diameter Downward-Facing Hemisphere," Proceedings of 4 th Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS4), Sapporo, Japan, December 2004.
C. Tangthieng and F. B. Cheung, “Thermosolutal Transport and Macrosegregation During Freeze-Coating of a Binary Solution on a Continuous Moving Object,” International Journal of Heat and Mass Transfer, Vol. 46, pp 2313 - 2327, 2003.
J. Sinha, L.E Hochreiter, and F. B. Cheung, "Effects of Surface Roughness, Oxidation, and Liquid Subcooling on the Minimum Film Boiling Temperature," Experimental Heat Transfer, Vol. 16, pp. 121-129, 2003.
M. J. Holowach, L. E. Hochreiter, F. B. Cheung, D. Aumiller, and R. J. Houser, "Scaling of Quench Front and Entrainment-Related Phenomena," Nuclear Engineering and Design, Vol. 223, Issue 2, pp. 197-209, 2003.
M. J. Holowach, L. E. Hochreiter, J. H. Mahaffy, and F. B. Cheung, "Modeling of Droplet Entrainment Phenomena at a Quench Front," International Journal of Heat and Fluid Flow, Vol. 24, Issue 6, pp. 902-918, 2003.
A. Sridharan, L. E. Hochreiter, F. B. Cheung, "The Behavior of Inverted Flow Film Boiling During the Reflood Process," Proceedings 6 th ASME-JSME Joint Thermal Engineering Conference, Paper No. TED-AJ03-623, March 2003.
A. J. Ireland, L. E. Hochreiter, F. B. Cheung, "Droplet Size and Velocity Measurements in a Heated Rod Bundle," Proceedings 6 th ASME-JSME Joint Thermal Engineering Conference, Paper No. TED-AJ03-624, March 2003.
E. R. Rosal, T. F. Lin, I. S. McClellan, L. E. Hochreiter, F. B. Cheung, "The Pennsylvania State University and U.S. Nuclear Regulatory Commission Rod Bundle Heat Transfer Facility," Proceedings 6 th ASME-JSME Joint Thermal Engineering Conference, Paper No. TED-AJ03-625, March 2003.
J. L. Rempe, D. L. Knudson, K. G. Condie, F. B. Cheung, K. Y. Suh, and S. B. Kim "A Strategy to Develop Enhanced In-Vessel Retention for Higher Power Reactor," Proceedings 11 th International Conference on Nuclear Engineering (ICONE 11-36430), April 2003.
J. L. Rempe, D. L. Knudson, K. G. Condie, F. B. Cheung, K. Y. Suh, and S. B. Kim "Preliminary Investigations to Develop an Enhanced In-Vessel Core Catcher Design," Proceedings 11 th International Conference on Nuclear Engineering (ICONE 11-36543), April 2003.
D. L. Knudson, J. L. Rempe, K. G. Condie, F. B. Cheung, K. Y. Suh, and S. B. Kim, "Late-Phase Melt Conditions Affecting the Potential for In-Vessel Retention in High Power Reactors," Proceedings 11 th International Conference on Nuclear Engineering (ICONE 11-36542), April 2003.
S. J. Kim, Y. H. Kim, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "One-Dimensional Downward-Facing Critical Heat Flux Concerning Surface Orientation and Gap Size Effects," Proceedings International Congress on Advanced Nuclear Power Plants (ICAPP), May 2003.
K. Y. Suh, Y. H. Kim, S. D. Lee, J. C. S. Kim, J. L. Rempe, F. B. Cheung and S. B. Kim, "Engineered Safety Features for In-Vessel Retention of Large Power Reactors," Proceedings International Congress on Advanced Nuclear Power Plants (ICAPP), May 2003.
F. B. Cheung , J. Yang, M. B. Dizon, J. L. Rempe, K. H. Suh and S. B. Kim, "Scaling of Downward Facing Boiling and Steam Venting in a Reactor Vessel/Insulation System," Proceedings 2003 ASME Summer Heat Transfer Conference, Paper HT2003-40208, July 2003.
M. B. Dizon, J. Yang, F. B. Cheung, J. L. Rempe, K. H. Suh and S. B. Kim, "Effects of Surface Coating on Nucleate Boiling Heat Transfer from a Downward Facing Surface," Proceedings 2003 ASME Summer Heat Transfer Conference, Paper HT2003-40209, July 2003.
F. B. Cheung , J. Yang, M. B. Dizon, J. L. Rempe, K. H. Suh and S. B. Kim, "On the Enhancement of External Reactor Vessel Cooling of High-Power Reactors," Proceedings 10 th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), October 2003.
J. H. Kang, R. J. Park, S. B. Kim, F. B. Cheung, K. Y. Suh and J. L. Rempe, "Experiments on Enhancement of In-Vessel Corium Retention Through In-Vessel Core Catcher," Proceedings 10 th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), October 2003.
S. W. Noh, Y. H. Kim, S. J. Kim, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "An Experimental Study of Critical Heat Flux in Inclined One Dimensional Channels," Proceedings 10 th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), October 2003.
J. L. Rempe, D. L. Knudson, K. G. Condie, F. B. Cheung, K. Y. Suh, and S. B. Kim " Development of an Enhanced In-Vessel Core Catcher for Improving In-Vessel Retention Margins," Proceedings 10 th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), October 2003.
M. J. Holowach, L. E. Hochreiter, J. H. Mahaffy, and F. B. Cheung," A Model for Predicting Droplet Entrainment at a Quench Front in Thermal Hydraulics Analysis Codes," Proceedings 2003 IMECE, November 2003.
S. J. Kim, Y. H. Kim, S. W. Nok, K. Y. Suh, J. L. Rempe, F. B. Cheung and S. B. Kim, "Experimental Study of Critical Heat Flux in Inclined Rectangular Gap," Proceedings GENES4/ANP2003, Kyoto, Japan, September 2003.
C. Tangthieng, F. B. Cheung and S. W. Shiah, 2002, Behavior of the Two-Phase Mushy Zone During Freeze Coating on a Continuous Moving Plate, Journal of Heat Transfer, Vol. 124, pp. 111-119, 2002.
A. A. Boral, F. B. Cheung and S. W. Shiah, 2002, Correlation Equations for Dissolution Heat and Mass Transport in an Aluminum-Steel System, International Journal of Transport Phenomena, Vol. 4, pp. 59-73, 2002.
A. Sridharan, L. E. Hochreiter, F. B. Cheung and R. L. Webb, 2002, Effect of Chemical Cleaning on Steam Generator Tube Performance, Heat Transfer Engineering, Vol. 23, pp. 38-47, 2002.
M. J. Holowach, L. E. Hochreiter, F. B. Cheung and D. AuMiller, 2002, Critical Heat Flux During Reflood Transient in Small Hydraulic Diameter Geometries, Nuclear Technology, Vol. 140, pp. 18-27, 2002.
M. J. Holowach, L. E. Hochreiter, and F. B. Cheung, 2002, A Model for Droplet Entrainment in Heated Annular Flow, International Journal of Heat and Fluid Flow, Vol. 23, pp. 803-822, 2002.
M. J. Holowach, L.E Hochreiter, F.B. Cheung and D. Aumiller, "Critical Heat flux During Reflood Transients in Small Hydraulic Diameter Duct," Proceedings 2001 IMECE, New York, NY, November 2001.
A.J. Andrew, R. Rosal, L.E Hochreiter, and F.B. Cheung, "Experimental Verification of the performance of a Droplet Injection System for Use in a Rod Bundle Heat Transfer Test Facility," Proceedings 2001 IMECE, New York, NY, November 2001.
C. Frepoli, A.J. Andrew, L.E Hochreiter, and F.B. Cheung, "RBHT Steam Cooling and Droplet Injection Pre-test Analysis Using COBRA-TF," Proceedings 2001 IMECE, New York, NY, November 2001.
F. B. Cheung, J. H. Koo, Y. C. Shih* and B. C. Yang*, “Theoretical and Experimental Study of Intumescent Fire-Retardant Materials,” Proceedings of the Symposium on Energy Engineering in the 21 st Centruy (SEE2000), Vol. 3, pp. 1289-1295, January 2000. (*Former students of Cheung)
A. A. Boral*, F. B. Cheung, and S. W. Shiah*, “Heat and Mass Transport During Dissolution in a Binary Metallic System,” Proceedings of the Symposium on Energy Engineering in the 21 st Centruy (SEE2000), Vol. 2, pp. 888-895, January 2000. (*Former students of Cheung)
C. Frepoli, L. E. Hochreiter, J. Mahafy, and F. B. Cheung, “A Noding Sensitivity Analysis Using COBRA-TF and the Effect of Spacer Grids During Core Reflood,” Proceedings of the 8 th International Conference on Nuclear Engineering, Paper No. 8711, April 2000.
F. B. Cheung, Y. C. Liu*, J. W. Park, D. W. Jerng and S. J. Oh, “Critical Heat Flux for Gap Boiling on the Outer Surface of a Fully Submerged Reactor Vessel,” Proceedings of the 35 th National Heat Transfer Conference, NHTC 2000-12010, Session T1-10 (in CD-ROM), August 2000. (*Former student of Cheung)
C. Tamgthieng* and F. B. Cheung, “Freeze Coating of a Binary Substance on a Nonisothermal Moving Plate,” Proceedings of the 35 th National Heat Transfer Conference, NHTC 2000-12179, Session T14-70 (in CD-ROM), August 2000. (*Current student of Cheung)
E. R. Rosal, T. F. Lin, L. E. Hochreiter, F. B. Cheung, D. E. Bessette and J. M. Kelly, 1999, Design of the Pennsylvania State University/NRC Nuclear Regulatory Commission Rod Bundle Heat Transfer Test Facility, Transaction American Nuclear Society, Vol. 81, pp. 354-355.
F.B. Cheung, K.H. Haddad, Y.C. Liu, and S.W. Shiah, Flow Visualization and Critical Heat Flux Measurement of a Boundary Layer Pool Boiling Process, Proceedings OECD/CSNI Specialist Meeting on Advanced Instrumentation and Measurement Techniques, Session VII, pp. 1-13, March 1997.
F.B. Cheung and K.H. Haddad, A Hydrodynamic Critical Heat Flux Model for Saturated Pool Boiling on a Downward Facing Curved Heating Surface, International Journal of Heat and Mass Transfer, Vol. 40, No. 6, pp. 1291-1302, April 1997.
F.B. Cheung, Y.C. Liu, and Y.C. Shih, Effect of Thermal Insulation on Nucleate Boiling on the Outer Surface of a Heated Hemispherical Vessel, Cooperative Severe Accident Research Program, (CSARP) Meeting, Washington, D.C., May 1997.
F.B. Cheung, K.H. Haddad, Y.C. Liu, and S.W. Shiah, High-Heat-Flux Nucleate Boiling on the Outer Surface of a Heated Hemispherical Vessel, AIChE Symposium Series #314, Vol. 93, pp. 95-101, August 1997.
F.B. Cheung and M. Ishii, Two-Phase Flow Studies, ANS Proceedings of the National Heat Transfer Conference, HTC Vol. 10, p. 65, August 1997.
A.L. Brundage and F.B. Cheung, Transient Thermal Response of a Hemispherical Lower Head upon Contact with a Heat-Generating Melt Layer, Proceedings of the 32nd National Heat Transfer Conference, Vol. 12, pp. 57-68, HTD Vol. 350, August 1997.
T.H. Fan and F.B. Cheung, Modeling of Transient Turbulent Natural Convection in a Melt Layer with Solidification, Journal of Heat Transfer, Vol. 119, No. 3, pp. 544-552, August 1997.
Y.C. Shih and F.B. Cheung, A Numerical Study of the Thermal Response of High-Temperature Ablative Materials, Numerical Heat Transfer Journal, Vol. 32, No. 6, pp. 555-574, November 1997.
F.B. Cheung and M. Shoukri, Instrumentation for Multiphase Flow, Proceedings ASME Heat Transfer Division, Vol. 1, p. 139, HTD Vol. 351, November 1997.
Y.C. Liu, Y.C. Shih, and F.B. Cheung, Experimental Study of Two-Phase Flow in a Hemispherical Annular Gap with Boiling on One Side of the Channel, Proceedings ASME Heat Transfer Division, Vol. 1, pp. 177-184, HTD-Vol. 351, November 1997.
J.H. Koo, P.S. Ny, and F.B. Cheung, Effect of High-Temperature Additives in Fine-Resistant Materials, Journal of Fine Sciences, Vol.15, pp. 488-504, December 1997.
F.B. Cheung, K.H. Haddad, and Y.C. Liu, Scaling of a Boundary Layer Pool Boiling Phenomena, Cooperative Severe Accident Research Program (CSARP) Meeting, Washington, D.C., May 1996.
F.B. Cheung. et al. Boiling Heat Transfer Introduction, Proceedings of the 31st National Heat Transfer Conference, Vol. 4, p. 91, HTD-Vol. 326, August 1996.
K.H. Haddad and F.B. Cheung, Steady-State Subcooled Nucleate Boiling on a Downward Facing Hemispherical Surface, Proceedings of the 31st National Heat Transfer Conference, Vol. 4, p. 105-115, HTD-Vol. 326, August 1996.
F.B. Cheung, B.W. Yang, and J.R. Riznic, Experimental Studies in Multiphase Flow, Proceedings ASME Heat Transfer Division, Vol. 3, p. ix, HTD-Vol. 334, November 1996.
Cheung, F.B. and K.H. Haddad, "Steady-State Observations and Theoretical Modeling of Critical Heat Flux Phenomena on a Downward Facing Hemispherical Surface." Proceedings 23rd Water Reactor Safety Meeting (October 1995).
Cheung, F.B., K.H. Haddad, and Y.C. Liu, "Steady-State Boundary Layer Boiling on Downward Facing Curved Surfaces." Cooperative Severe Accident Research Program (CSARP) Meeting Washington, D.C. (May 1995).
Cheung, F.B., Y.A. Hassan and A. Singh (Editors), "Thermal Hydraulics of Advanced Nuclear Reactors." Proc. National Heat Transfer Conference vol. 14, HTD 316 (1995).
Haddad, K.H., Y.C. Liu, and F.B. Cheung, "Spatial Variation of Critical Heat Flux on a Downward Facing Hemispherical Surface." National Heat Transfer Conference HTD 316, Portland, OR, pp. 23-32 (August 1995).
Koo,J.H., M.J. Miller, P.S. Ng, and F.B. Cheung, "High-Temperature Additives in Fireproofing Materials for Building Construction." 3rd Asian-Pacific Symposium on Combustion and Energy Utilization Hong Kong Polytechnic University (December 1995).
Yang, B.C., F.B. Cheung, and J.H. Koo, "Prediction of Thermo-mechanical Erosion of High Temperature Ablatives in the SSRM Facility." AIAA-95-0254 33rd Aerospace Sciences Meeting Reno, NV (January 1995).
York, B., N. Sinha, S. Dash, L. Anderson, J. Koo, and F.B. Cheung, "Exhaust Plume Studies with Applications to VLS." AIAA-95-0255 33rd Aerospace Sciences Meeting Reno, NV (January 1995).
Cheung, F.B. and E.V. McAssey (Editors), "Natural Circulation Phenomena in Nuclear Reactor Systems." ASME Symposium HTD 281 (1994).
Cheung, F.B. and K.H. Haddad, "Observation of the Dynamic Behavior of the Two-Phase Boundary Layers in the SBLB Experiments." Proceedings 22nd Water Reactor Safety Meeting (October 1994).
Cheung, F.B., B.C. Yang, S.W. Shiah, D.H. Cho, and M.J. Tan, "Natural Convection Mass Transfer on a Vertical Steel Structure Submerged in a Molten Aluminum Pool." ASME Winter Annual Meeting HTD 281, pp. 43-49, Chicago, IL (November 1994).
Cheung, F.B., K.H. Haddad, L.M. Charma, F. Otero, and A.L. Brundage, "Boundary Layer Boiling on the External Bottom Surface of a Hemispherical Vessel." 10th Proc. Nuclear Thermal Hydraulics ANS Winter Annual Meeting, Washington, D.C., 155-162 (November 1994).
Tan, M.J., D.H. Cho, and F.B. Cheung, "Thermal Analysis of Heat-Generating Liquid Pools Bounded from Below by Curved Surfaces." Journal of Heat Transfer vol. 116, pp. 127-135 (1994).
Cheung, F.B., B.C. Yang, D. Li, D.H. Cho, and M.J. Tan, "Effects of Freestream Velocity and Concentration on Dissolution Mass Transport in a Steel/Aluminum System." AIChE Symposium Series vol. 84, n. 295, pp. 396-403 (1993).
Cheung, F.B., B.C. Yang, R.L. Burch, and J.H. Koo, "Effect of Melt Layer Formation on Thermo-Mechanical Erosion of High-Temperature Ablative Material." Proc. Pacific International Conference on Aerospace Science and Technology National Cheng Kung University, Taiwan, pp. 302-309 (December 1993).
Cheung, F.B., D. Li, D.H. Cho, and M.J. Tan, "Natural Convection Mass Transfer During Dissolution of a Vertical Steel Plate in Molten Aluminum." Presented at the 6th International Symposium on Transport Phenomena in Therm Engineering Seoul, Korea (1993).
Kline,M.C., R.D. Woodward, R.L. Burch, F.B. Cheung, and K.K. Kuo, "Imaging of Impinging Jet Breakup and Atomization Processes Using Copper-Vapor Laser Sheet Illuminated Photography." Proc. Third Symposium on Special Topics in Chemical Propulsion: Non-Intrusive Combustion Diagnostics Scheveningen, Netherlands, pp. 95-96 (May 1993).
Kuo, K.K., and F.B. Cheung, "Droplet Entrainment and Breakup by Shear Flow." Presented at 30th JANNAF Combustion Subcommittee Meeting (November 1993).
Tan, M.J., D.H. Cho, and F.B.Cheung, "Transient Analysis of Dissolution of a Reactor Bottom Head into a Melt Pool." Presented at the Second International Conference on Nuclear Engineering (ICONE- 2) San Francisco, CA (March 1993).
Tan, M.J., D.H. Cho, and F.B.Cheung, "Modeling and Analysis of Melt Pool Heat Transfer and Vessel Bottom Head Dissolution." National Heat Transfer Conference HTD 245, Atlanta, GA, pp. 11-28 (1993).
Woodward, R.D., R.L. Burch, K.K. Kuo, and F.B. Cheung, "Measurement of Intact-Core Length of Atomizing Liquid Jets by Image Deconvolution." Fifth PERC Annual Sym-posium Pennsylvania State University, University Park, PA, pp. 1-4 (September 1993).
Woodward, R.D., R.L. Burch, K.K. Kuo, and F.B. Cheung, "Real-Time X-Ray Radiography Study of Liquid Jet Breakup from Rocket Engine Injections." Proc. Third Symposium on Special Topics in Chemical Propulsion: Non-Intrusive Combustion Diagnostics Scheveningen, Netherlands, pp. 139-141 (May 1993).
Yang, C. and F.B. Cheung, "A Numerical Study of Erosion Phenomena of Ablative Materials." Proc. 2nd Conf. on Computational Fluid Dynamics, The Chinese Aeronautical and Astronautical Society pp. 321-328 (May 1993).
Yang, C., F.B. Cheung, and J.H. Koo, "Numerical Investigation of Thermo-Chemical and Mechanical Erosion of Ablative Materials." AIAA-93-2045, 29th AIAA Joint Propulsion Conference, Monterey, CA (July 1993).
Yeh, Y.P., F.B. Cheung, K.K. Kuo and T.A. Litzinger, "Numerical Study of An Axisymmetric Turbulent Jet-Impingement Flow." AIAA-91-3596 31st AIAA Aerospace Science Meeting Reno, Nevada (January 1993).
Chen, J.L., K.K. Kuo, and F.B. Cheung, "Theoretical Model of the Interior Ballistics Processes in an Electrothermal Gun." Journal of Propulsion and Power vol. 8, n. 3, pp. 655-666 (1992).
Cheung, F.B., and P.F. Peterson (Editors), "of Advanced and Special Purpose Reactors." ASME Symposium Volume HTD 209 (1992).
Cheung, F.B., B.C. Yang, D.H. Cho, and M.J. Tan, "Transient Dissolution of a Steel Structure in an Aluminum Melt Pool." HTD 209 61-70, ASME Winter Annual Meeting, Anaheim, CA (November 1992).
Cheung, F.B., S.W. Shiah, D.H. Cho, and M.J. Tan, "Modeling of Heat Transfer in a Horizontal Heat-Generating Layer by an Effective Diffusivity Approach." ASME HTD 192, National Heat Transfer Conference, San Diego, CA, pp. 55-62 (August 1992).
M.J., D.H. Cho, and F.B. Cheung, "Thermal Analysis of Heat-Generating Liquid Pools Bounded from Below by Curved Surfaces." HTD 209 ASME Winter Annual Meeting, Anaheim, CA, pp. 33-42 (November 1992).
Tan, R.L. Burch and F.B. Cheung, "Numerical Study of Heat Transfer in Expander Cycle Engines, Presented at Fourth PERC Annual Symposium, Marshall Space Flight Center, Huntsville, AL (September 1992).
Woodward, R.D., M. Kline, R.L. Burch, K.K. Kuo and F.B. Cheung, "Measurement of Intact- Liquid-Core Length for Shear Coaxial Injection." Fourth PERC Annual Symposium, Marshall Space Flight Center, Huntsville, AL (September 1992).
Yeh, Y.P., K.K. Kuo, F.B. Cheung, and T.A. Litzinger, "Experimental Study of Thermal Erosion in a Subscale Solid-Propellant Launcher." AIAA-92-3511, 28th Joint Propulsion Conference, Nashville, TN (July 1992).