Publications
Hanagan, L.M., Trethewey, M.W., Beals, M.F. and Farwell-Greiner, J.J., 2002, Modal Testing Of Multi-Bay Steel-Framed Floors, 20th International Modal Analysis Conference, Los Angeles, CA.
Trethewey, M.W and Sommer, H.J., 2002, Measurement of Rotational DOF Frequency Response Functions with Pure Moment Excitation, International Conference on Structural Dynamics Modeling Test, Analysis, Correlation and Validation, Madeira Island, Portugal.
Maynard, K.P. and Trethewey, M.W., 2001, Blade and Shaft Crack Detection using Torsional Vibration Measurements. Part 3: Field Application Demonstrations, Noise and Vibration Worldwide, Vol. 32, No. 12, pp 16-23.
Litzinger, T.L., Trethewey, M.W. and Gardner, J.F., 2001, Integrated Design, Experimentation, Analysis and Life Skills (IDEALS) Courses, Session 2566, 2001 American Society of Engineering Education Annual Conference and Exhibition, Albuquerque, NM.
Hanagan, L.M., Raebel, C.H., and Trethewey, M.W., 2001, Development of an Experimental Protocol for Floor Vibration Assessment, 19th International Modal Analysis Conference, Kissimmee, FL.
Trethewey, M.W., and Koss, L.L., 2001, Characteristics of Force Frequency Shifting for Low Frequency Excitation, 19th International Modal Analysis Conference, Kissimmee, FL.
Maynard, K.P, Trethewey, M.W. and Groover, C, 2001, Application of Torsional Vibration Measurement to Shaft Crack Monitoring in Power Plants, 55rd Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA.
De Meter, E.C., Wei, X., Choudhuri, S., Vallapuzha, S., and Trethewey, M.W., 2001, A Model to Predict Minumum Clamp Pre-Loads in Light of Fixture-Workpiece Compliance, International Journal of Machine Tools and Manufacture, Vol. 41, pp. 1031-1054.
Raebel, C.H., Hanagan, L.M., and Trethewey, M.W., 2001, Dynamic Measurements Of In-Place Steel Floors To Assess Vibration Performance, ASCE Journal of Performance of Constructed Facilities.
Rao, S.B., Neal, G.L., DeMeter, E.C. and Trethewey, M.W., 2000, Application of the GWPS for Machining of a Transmission Housing, 2000, ASME Design Engineering Technical Conference, Paper no. DETC 2000/PTG-14417, Baltimore.
Haymanali, R., De Meter, E. C., and M. W. Trethewey, 2000, Experimental Compliance Measurement of Fixture-Workpiece Systems, Paper No. 13164 of the Proceedings of the 2000 Japan-USA Joint Conference on Flexible Automation, Ann Arbor, MI, pp. 1-8.
Trethewey, M.W., Koss, L.L., Trethewey, J.S., 2000, Application of a Low Frequency Moment Shaker for Vibration Testing, 18th International Modal Analysis Conference, San Antanio, TX.
Maynard, K.P, Lebold, M., Groover, C., Trethewey, M.W., 2000, Application of Double Resampling to Shaft Torsional Vibration Measurement for the Detection of Blade Natural Frequencies, 54rd Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA.
Xie, W., De Meter, E.C., Trethewey, M. W., 2000, An Experimental Evaluation of Coefficeints of Static Friction of Common Workpiece-Fixture Pairs, International Journal of Machine Tools and Manufacture, Vol. 40, pp. 467-488.
Trethewey, M. W2000Window and Overlap Processing Effects on Power Estimates from Spectra, Mechanical Systems and Signal Processing, Vol. 14, No. 2. pp. 267-278.
Haymanali, R., De Meter, E.C., and Trethewey, M.W., 2000, The Development of a Compliance Tester for Assessing and Reducing the Static Compliance of Fixture-Workpiece Systems, Society of Manufacturing Engineers-Journal of Manufacturing Systems, Vol. 19, No.2. pp. 108-120.
Xie, W., Choudhuri, S., Vallapuzha, S., De Meter, E.C., and Trethewey, M.W., 2000, Experimental Assessment of the Effectiveness of the Clamp Actuation Intensity Model, International Journal of Production Research, Vol 38, No 18, pp. 4611-4633.
Maynard, K.P. and Trethewey, M.W., 1999, On the Feasibility of Blade Crack Detection Through Torsional Vibration Measurements, 53rd Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA.
Koss, L.L. and Trethewey, M.W., 1999, Application of Frequency Shifting Shaker to Low Frequency Modal Excitation, International Conference on Applications of Modal Analysis ’99, Gold Coast, Queensland, Australia.
Rieker, J. R., and Trethewey, M. W1999Finite Element Analysis of an Elastic Beam Structure Subjected to a Moving Distributed Mass Train, Mechanical Systems and Signal Processing, Vol. 13, No. 1, pp.31-51.
Wu, C.Y., Neal, G.L., De Meter, E.C., Trethewey, M.W., and Rao, S., 1999, Global Workpiece Positioning System (GWPS) Part 1: Concept and Development of a Laser Probe Based System, Society of Manufacturing Engineers-Journal of Manufacturing Systems. Vol. 18, No. 6, pp. 431-446.
Wu, C.Y., Neal, G.L., De Meter, E.C., Trethewey, M.W., and Rao, S., 1999, Global Workpiece Positioning System (GWPS) Part 2: Development of an Ultrasonics Based System, Society of Manufacturing Engineers-Journal of Manufacturing Systems, Vol. 18, No. 6, pp. 447-459.
C.H. Chu, M.W. Trethewey, E.C. DeMeter, and C.Y. Wu. Modeling and Analysis of Workpiece Static and Dynamic Structural Characteristics for Machining Operations, 15 th International Modal Analysis Conference, Orlando, FL, February 3-6, 1997.
M.W. Trethewey, Structural Impact Testing Force Spectra, 15 th International Modal Analysis Conference, Orlando, FL, February 3-6, 1997.
Wu, C.Y., Haymananali, R.R., DeMeter, E.C., Trethewey, M.W., 1997, Static and Dynamic Evaluation of Workpiece/Fixturing Systems for Machining Operations, 6th International Conferences on Recent Advances in Structural Dynamics, University of Southampton, UK.
D.H. Soyster and M.W. Trethewey, Use of Rotational Elements in Structural Dynamics Modification, Modal Analysis: The International Journal of Analytical and Experimental Modal Analysis, Vol. 11, pp. 76-82, 1996.
C.H. Chu and M.W. Trethewey, Structural Design with Experimental Based Models, 14 th International Modal Analysis Conference, Dearborn, MI, February 12-15, 1996.
C.H. Chu and M.W. Trethewey, Rapid Structural Design Change Evaluation with an Experimental Based FEM, Indo-US Symposium on Emerging Trends in Vibration and Noise Engineering, New Delhi, India, March 1996.
M.W. Trethewey and N.J. Salamon, Generic Automotive Dynamic Chassis Modeling, International Symposium on Vehicle NVH, Seoul, Korea, June 1996.
Chu, C.H., J.A. Cafeo, and M.W. Trethewey, "Design Modification with Experimental Based Structural Models." 12th International Modal Analysis Conference Nashville, TN (February 1995).
Liu, S.P., A.M. Dent, J.W. Thornton, M.W. Trethewey, K.W. Wang, S.I. Hayek, F.H.K. Chen, "Experimental Evaluation of Automotive Chain Drive Impact Noise." Proceedings of the 1995 SAE Vehicle Noise and Vibration Conference SAE Paper #891151, Traverse City, MI (May 1995).
Bokelberg, E.H., H.J. Sommer, and M.W. Trethewey, "A Six Degree of Freedom Laser Vibrometer; Part II - Experimental Evaluation." Journal of Sound and Vibration. vol. 178, n. 5, pp. 655-667 (1994).
Rieker, J.R. and M.W. Trethewey, "Dynamic Evaluation of Beam Structures Subjected to Moving Dynamic Mass Trains." 12th International Modal Analysis Conference Honolulu, HI (February 1994).
Sommer, H.J., M. Erickson, M.W. Trethewey, J.A. Cafeo, "Single Beam Vibrometer for Simultaneous Measurement of Translation Pitch and Roll with Neural Net Calibration." 12th International Modal Analysis Conference Honolulu, HI (February 1994).
Cafeo, J.A., M.W. Trethewey, H.J. Sommer, "On the Use of Measured Rotational Degrees-of-Freedom in Structural Dynamics Modification." Proceedings of the 11th International Modal Analysis Conference pp. 522-527 (1993).
Lin, Y.H. and M.W. Trethewey, "Active Vibration Suppression of Beam Structures Subjected to Moving Loads: A Feasibility Study Using Finite Elements." Journal of Sound and Vibration vol. 166, n. 3, pp. 383-395 (1993).
Liu, S., S. Hayek, K. Wang, and M. Trethewey, "Meshing Noise from Timing chain Drives." Proceedings of the Acoustical Society of America Spring Meeting (1993).
Trethewey, M.W. "Utilization of Rotational Degrees-of-Freedom in Experimental Structural Dynamics." Proceedings of the Korea-U.S. Vibration Seminar pp. 209-227 (1993).
Trethewey, M.W., H.J. Sommer, and J.A. Cafeo, "A Dual Beam Laser Vibrometer for Measurement of Dynamic Structural Rotations and Displacements." Journal of Sound and Vibration vol. 164, n. 1, pp. 67-84 (1993).
Trethewey, M.W., H.J. Sommer, J. Cafeo, C. Chu, "Measurement and Applications of Rotational Degrees of Freedom in Structural Vibration." Proceedings of the International Conference on Noise and Vibration Control (1993).
Lin, Y., M. Trethewey, M, "Finite Element Analysis and Experimental Model Verification for structures Subjected to Moving Dynamic Loads." Proceedings of the 10th International Modal Analysis Conference pp. 1057-1063 (1992).
Lee, G., M. Trethewey, M, "An On-Site Modal Testing Method For The Detection of Structural Non-Linearities, Part I: Development." Mechanical Systems and Signal Processing vol. 6, n. 1, pp. 29-40 (1992).
Lee, G., M. Trethewey, M, "An On-Site Modal Testing Method For The Detection of Structural Non-Linearities, Part II: Application." Mechanical Systems and Signal Processing vol. 6, n. 2, pp. 155-165 (1992).
Trethewey, M.W. and J.A. Cafeo, "Tutorial: Signal Processing Aspects of Structural Impact Testing." The International Journal of Analytical and Experimental Modal Analysis vol. 7, n. 2, pp. 129-149 (1992).
Evensen, H.A. and Trethewey, M.W, 1991, Bias Errors in Estimating Frequency Response and Coherence Functions from Truncated Transient Signals, Journal of Sound and Vibration, Vol. 145, No. 1, pp. 1-16.
Lin, Y.-H., Trethewey, M.W. and Rieker, J.R., 1990, Fine Tuning of Moving Load Finite Element Models with Experimental Modal Data, 8th International Modal Analysis Conference, Kissimmee, FL.
Stone, W.A., Trethewey, M.W. and Wang, K.W, 1990, Experimental Evaluation of Chain Noise, 119th Meeting of the Acoustical Society of America, State College, PA.
Cafeo, J.A., Trethewey, M.W. and Sommer, H.J., 1990, A Noncontacting Transducer for the Measurement of Vibrating Displacements and RotationsInter-Noise 90 Proceedings, Gothenburg, Sweden.
Lin, Y.H. and Trethewey, M.W., 1990, Dynamic Beam Response Due to an Arbitrarily Moving Dynamic System by Finite Element Analysis, Journal of Sound and Vibration. Vol. 136, No. 1, pp. 323-342.
Lin, Y.H., Trethewey, M.W., Reed, H.M., Shawley, J.D., and Sager, S.J, 1990, Dynamic Modeling and Analysis of a High Speed Precision Drilling Machine, Transactions of ASME-Journal of Vibration and Acoustics. Vol. 112, No. 3, pp. 355-365.