Business Card Holder

Figure 2: Functional business card holder

Use: This functional business card holder was built as part of a ME 415W rapid prototyping assignment.

Dimensions: 5.5" x 4" by 2.5"

Approximate Build Time: 8 hours

Build Orientation: Bottom down, as shown

RP Machine: LOM 1015

CAD Software: Unknown

Notes:

• The base of this object is solid, which made post-processing easier. If this part were to be built on the Genisys, the base should be hollowed out (performed in the CAD program) to minimize warpage.
  
• This model was finished with several coats of polyurethane.
  

Next Example

Back to the Learning Factory RP page